How to clear the AC condensate drain
The condensate drain carries away the water your air conditioner removes from the air. To clear it, switch the unit off, find the drain outlet, remove visible dirt from the opening and, if it is blocked, gently vacuum it out. If water still will not flow or it leaks indoors, call a professional.
Updated on 18 October 2026
Safety notice: switch the unit off and isolate it at the breaker before touching anything. Do not pour water into the indoor unit or near sockets and electrical connections. If water reaches a wall, a ceiling or a socket, cut the power to that area and call a professional.
What the drain is for
When cooling, the unit condenses moisture from the air, just like a cold glass on a summer day. That water drips into a tray and leaves through a pipe to the outside or to a downpipe. If the pipe blocks, the water stays inside and ends up dripping from the indoor unit.
How it usually gets blocked
- Dust and lint mixing with moisture to form sludge.
- Algae and mould, more common in warm, humid weather, which the coast encourages.
- Insects or debris entering through the opening of the outdoor pipe.
- A crushed pipe, tight bends or the wrong slope.
- Very dirty filters that let dust through to the tray.
How to clear it safely
- Switch the unit off and isolate it at the breaker.
- Find the opening of the drain pipe, usually near the outdoor unit, on a terrace or at a downpipe.
- Remove visible dirt, leaves or insects from the opening by hand.
- If there is sludge inside, vacuum it out with a wet and dry vacuum held to the opening, without forcing it.
- Rinse only the accessible stretch of pipe with a little lukewarm water and check that it flows freely.
- Put a container or a towel under the indoor unit, run it in cooling mode and check after a few minutes that it does not drip.
How to prevent it
- Clean the filters regularly: the steps are in our guide to cleaning the filters.
- Check the drain outlet at the start of the season and, if the unit is used heavily, a few times during the summer.
- Make sure the pipe is not crushed or kinked and that the outlet does not end up sitting in water.
- Have a maintenance check before summer: it includes the drain.
What not to do
- Do not use bleach or harsh products: they can damage the pipes and components.
- Do not pour water into the indoor unit.
- Do not push stiff rods or wire down the pipe: you could puncture it.
- Do not keep using the unit if it leaks indoors.
- Do not touch the refrigerant circuit.
When to call a professional
- Water still does not flow, or dripping continues after you have cleared the opening.
- You cannot find the drain, or it runs hidden in the wall or false ceiling.
- Your unit is ducted or a cassette with a condensate pump: if it fails, do not touch it.
- There is ice on the indoor unit or the unit also cools poorly.
- Water is wetting walls or ceilings or is near sockets. If it is an underlying fault, see our air conditioning repair page.
Send us a photo and your area on WhatsApp: we will advise you and give you a quote. We reply within 2 hours during working hours (Monday to Friday, 8:00 to 18:00; Saturdays, 8:00 to 16:00, excluding public holidays).
Frequently asked questions
Why is water coming out of my air conditioner?
It is moisture the unit condenses while cooling. It normally leaves through the drain pipe; if it drips indoors, there is usually a blockage or a slope problem.
Can I pour bleach down the air conditioner drain?
It is not recommended: it can damage the pipes and components. Remove the dirt from the opening and, if it stays blocked, call a professional.
How often should the condensate drain be cleaned?
It is worth checking at the start of the season and, with heavy use or high humidity, a few times in summer. An annual service includes it.
Can a blocked drain damage the unit?
Yes, over time: standing water can cause damp, bad smells and damage to nearby components. It is better to act early.