How to clean air conditioner filters
To clean air conditioner filters, switch the unit off, open the front panel of the indoor unit, slide the filters out, wash them in lukewarm water with mild soap, let them dry in the shade and refit them. With daily use, repeat this every month or two.
Updated on 18 October 2026
Safety notice: Switch the unit off and isolate it at the breaker or the plug before opening it. Do not touch electrical parts or wet the inside of the unit. If you cannot reach it safely (high ceiling, unsteady ladder), do not climb up: call us.
Step by step
- Switch the unit off and wait for the fans to stop.
- Open the front panel of the indoor unit; on most splits it lifts with both hands.
- Slide the filters out, pulling gently towards you. Note how they sit so you can refit them the same way.
- Vacuum off the loose dust or tap the filters to remove the worst of it.
- Wash them in lukewarm water with a little mild soap. If there is grease (open kitchen next to the living room), rub with a soft sponge.
- Rinse well and let them dry completely in the shade, without a hairdryer or direct sun.
- When they are dry, put them back, close the panel and switch the unit on.
How often to clean them
It depends on use and surroundings. With the air conditioning on daily, a common reference is every month or two. On the coast there are reasons to check more often: Saharan dust (calima), ordinary dust, pollen and humidity build up on the filter sooner, and homes with pets or an open kitchen get dirtier faster. If you barely use the unit, check it at the start and end of the season.
Why it matters
A dirty filter restricts airflow: the unit cools less well, works harder and uses more energy. It can also cause ice on the indoor unit, which then melts and drips, and it holds on to odours. It is the simplest maintenance task and the one you notice most.
What not to do
- Do not use hot water or harsh products: they warp and damage the filter.
- Do not dry it with a hairdryer or in direct sun.
- Do not switch the unit on without filters, or with damp ones.
- Do not wet the electrical parts or the fans of the indoor unit.
- Do not open the outdoor unit or touch the refrigerant circuit.
When to call a professional
- After cleaning the filters there is still a bad smell, weak cooling or dripping.
- There is ice on the indoor unit or the pipes.
- You cannot remove the filters, or your system (ducted, cassette) has grilles that are hard to reach.
- The filters are broken or warped and need replacing.
- The unit has not been checked for a long time: a maintenance visit also covers the coils, drain and connections.
Send us a photo and your area on WhatsApp: we will advise you and give you a quote. We reply within 2 hours during working hours (Monday to Friday, 8:00 to 18:00; Saturdays, 8:00 to 16:00, excluding public holidays).
Frequently asked questions
How often should I clean air conditioner filters?
With daily use, a common reference is every month or two. On the coast, with Saharan dust, dust or pets, it can be more often.
Can I wash the filters in hot water?
No. Hot water can warp them. Use lukewarm water with a little mild soap and let them dry completely before refitting.
What happens if I run the air conditioning without filters?
It is better not to: dust gets into the coil and the fans, and the unit gets dirty inside much faster.
Is cleaning the filters the same as a full service?
No. It is something you can do yourself; a service also checks the coils, drain, fans and connections, and is done by a technician.